How to Install a Ghost Immobiliser
A ghost immobiliser is a hidden security system that shields your vehicle from key cloning and hacking. It stops the engine from running until a PIN code has been entered. This could be as long as 20 characters.
This additional layer of security is not detectable by thieves who may not expect it. Certain systems also come with an application that lets owners disarm the immobiliser in case they forget their PIN or to switch to the service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser is an advanced security system that can be integrated into your vehicle's ECU offering a secure line of defence against thieves. It is highly effective and user-friendly, making it a valuable addition to your vehicle's security arsenal. However, like any anti-theft device, it's not impervious to failure and requires regular maintenance to ensure proper operation. Luckily, this guide will aid you in getting the most benefit from your Ghost 2 Immobiliser.
CAN (Controller Area Network) is a robust serial network that lets microcontrollers communicate with one another across short distances without the need for central control units. It is designed to multiply electrical wiring in vehicles, thereby saving on copper. It offers many advantages, such as low cost and simple use.
The CAN protocol is utilized in the majority of modern automobiles to connect with the engine management system, steering control module air conditioning controls and many more. It also carries sensor information like speed sensors, as well as other inputs, to control the vehicle's various features. The CAN bus is able to monitor the condition of these various components and could stop the vehicle from starting if it's in an unsafe condition.
It's crucial to understand how the CAN bus operates and how it's secured. It is possible to add additional features to vehicles using CAN bus, however it is important to protect it from hackers and other threats. The best way to achieve this is to install a firewall and monitoring your CAN bus using software.
Ghost2's control unit is hidden away inside the car's wiring harness or dashboard, removing the possibility of a thief physically altering it. It is impossible to reset a PIN or an emergency code without having access to the vehicle.
If you must give your car away for maintenance, valet parking, or any other reason, you can activate the Transport Mode. This feature will disable the Ghost immobiliser's ignition and keyfob functions, and will only be activated when the car reaches 31 mph for 15 minutes.
How do you create a PIN code
The Ghost immobiliser shields your vehicle from theft. The latest technology utilizes a PIN code to shut down the engine and block it from running without the proper code or an authorized fob or mobile device. The system's subtle design ensures the system is not noticed and offers unparalleled security against theft. Additionally the system is TASSA certified and can lead to significant savings on car insurance premiums.
During the installation when you install the Ghost system goes into an learning mode that records the sequence of buttons that are pressed to create your unique pin code. Once the pin code is created and the installer has completed its work, it will guide you through the process of activating the system. Once activated, the Ghost system will disable the motor that starts your vehicle until a valid PIN has been entered or the vehicle is switched to transport mode. This makes it extremely difficult for thieves to duplicate or hack your vehicle's starting system.
It's easy to set up it is easy to install a Ghost immobiliser, however, you must follow the precise instructions in the user's guide to ensure proper performance. Basic hand tools will assist in making the perfect connections, and a multimeter can aid in checking electrical values. Insulation tape and heat shrink tubing may protect the exposed wiring Cable tie-ups are crucial to keep everything neat and secure. Test the system on regular basis to identify any issues that could be.
After the installation is completed after the installation is complete, you must perform a final check of the system prior to switching on the ignition of your vehicle. Ghost immobilisers are able to rearm themselves after 3 to 30 second, dependent on the model of the vehicle. The system also comes with a Service/Valet Mode which allows you to temporarily disable the system to service or valet parking.
Idealy, the immobiliser will be hidden beneath the dashboard or behind the steering wheel. It is recommended to use a small piece of paint or duct tape to mark the CAN H and L wires so that you can easily locate them when you are testing. The CAN H and L wires should also be connected to an electrical source that provides an uninterrupted 12V. It is important to check the connections again after testing because an incorrect identification of these wires could cause system malfunction.
Invoking the system
A ghost immobiliser prevents your car from starting until you press certain buttons on the vehicle, typically on the steering wheel or door panel, or the central console. The sequence is determined by the user and is able to be changed at any time. Once activated, the system will not be removed. This is a fantastic option for anyone looking to protect their vehicle from theft.
The system is designed to be undetectable, meaning it cannot be detected by modern diagnostics or code-grabbing technology. It also doesn't send out radio frequencies, which makes it even difficult for thieves to identify the device.
If the device is detected, it will prevent the engine from starting and will sound an alarm with a loud sound to scare away the thief. The device can be used to monitor the location of the car and assist police locate it when it is stolen.
Contact Car Specalist Customs for a quote or to discuss your options if you're interested in an immobiliser that is ghost-like. We are fully trained to install a ghost immobiliser on your vehicle and will ensure that it is tucked away in a remote area. We also offer other security measures, such as an ignition lock for your wheel and a kill switch to keep your car safe from thieves.
Disarming the System
If you own an Ghost immobiliser installed to your vehicle, it's essential to know how to disable it. This will assist you in the case that you lock your keys inside the car or your battery dies. The system utilizes a unique PIN code that only you are aware of. It cannot start the vehicle without this code. The most efficient method of entering the code is to press a combination of buttons on your dashboard or the steering wheel. This is a much easier method than using the key fob and also stops anyone from copying your remote.
Unlike some aftermarket immobilisers that require cutting wires for installation, Ghost2 is non-invasive and is compatible with your vehicle's bus network to function. Its most notable characteristic is its ability to bypass the engine without affecting your vehicle's normal functions, making it difficult for thieves to use signal boosters or clone your car key. It does not emit radio frequency, so thieves cannot detect it.
The Ghost system also has a Transport Mode which allows you to temporarily disable the security system in situations such as transportation or servicing. This feature is ideal when you're lending your vehicle out to someone else, without sharing your PIN code or if your vehicle requires to be protected when you drive it. Press the service button five times over 2 seconds to activate Transport Mode. The Ghost system will confirm activation with five indication signals.
Save the emergency code in your vehicle in a safe location. If Ghost 2 immobiliser find yourself locked out of your car You can call the company or technician who installed the system and they'll give you the code. If you are unable to get in touch with them, you can call an authorized dealer. However, this might require verification procedures, and you could be charged additional charges.
In addition to the convenience of this system, you can also count on it to guard your car against theft and help reduce the cost of insurance. Many insurance companies offer lower costs or financial incentives for those who install this system to prevent theft.